Wooden stormproof windows
The Welsh Borders: rugged countryside, rolling hills…and driving rain. The ideal windows for a stone cottage in this exposed environment are wooden stormproof windows.
What are stormproof windows?
‘Stormproof’ is a term used for a particular design of window that provides greater protection against the elements. In the case of casement windows, the opening casement has a lip that covers the static window frame (see picture below). Compared to conventional casements, which sit inside the window frame, this overlap provides a better seal. When made in a hard wood and double glazed, these windows should stormproof a cottage for many years.
Wooden stormproof windows
Oliver Gibbs Carpentry & Joinery was commissioned to make 7 casement stormproof windows in Oak. After producing drawings, the units were crafted by hand in our Shropshire workshop. The windows were glazed with thin 14mm krypton filled double glazing and finished with exterior grade oil, showing the character and beauty of the wood. A local blacksmith forged the ironmongery, which we fitted when installing the windows to the cottage. The natural warmth of the finished Oak windows nicely complements the cold grey of the Welsh stone.
The stormproof windows maybe well designed for the Welsh Borders, but we discovered our van is not – it broke down several times on our journey to and from Shrewsbury. If only vans lasted as long as English Oak!
For more information or a quote for making or fitting wooden stormproof windows in Shropshire, please contact our Shrewsbury Carpenters and Joiners.
Gallery
Click on images to enlarge
4 Comments
Graeme Easterbrook · February 22, 2017 at 6:56 pm
Hi there , I may need to make 2 stormproof windows with 3 openers in each ,left ,right and top – do you use finger joints ? And do you assemble the frame first then rebate the back out after ? Any light shone on this would be much appreciated….
Regards
Graeme
Oliver · December 29, 2022 at 5:26 pm
Hi Graeme, I wouldn’t use finger joints for storm windows; I would use a double tenon joint, with a peg if reinforcement were needed. I would tend to rebate the back before assembling the frame for ease. Hope that helps.
Natasha Coombs · November 27, 2023 at 9:48 am
Nice to see our windows still being used on your site!
Oliver · November 27, 2023 at 10:21 am
Thanks for commenting and still following the site!